Precision vitrine hardware and display fittings.

Commercial shopfitters and museum vitrine contractors require verified structural data before issuing project hardware schedules. Each component below is milled from solid alloy billets or structural extrusions, calibrated to ±0.05 mm mechanical tolerance, and quoted on a clear volume tier basis from our Simi Valley warehouse.

Solid 316 stainless flush pull handle.

Milled from solid 316 stainless billet with zero exposed perimeter fasteners and recessed 14 mm finger grip.

Item Code SPZ-FP-316
Material Alloy Solid 316 Stainless
Price Basis Tiered per unit
Recessed flush pull handle in solid brushed stainless steel

Recessed Cavity Engineering

Standard stamped sheet metal handles warp under screw tension and leave sharp edge burrs that catch on gloves. The SPZ-FP-316 is CNC milled from a solid cold-rolled 316 stainless steel block. The 14 mm finger cavity provides positive grip without requiring through-glass screw holes or perimeter bezels.

Suitable for heavy glass vitrine bypass sliders, concealed pocket millwork, and museum archive storage cabinets. Ships with pre-applied structural acrylic bonding transfer film and optional concealed rear anchor lugs.

Dimensions 180 mm × 45 mm × 16 mm depth
Pocket Milling Depth 14.5 mm routed pocket recommended
Mechanical Tolerance ±0.05 mm on perimeter margins
Standard Finish 320-grit directional satin brush
Quotation Foundation Quoted per unit tiered by quantity: sample units for mockups, and commercial brackets at 20+, 50+, and 100+ units.

Cantilever vitrine shelf bracket with glass clamping.

High-tensile structural 6063-T6 aluminum extrusion supporting up to 45 kg cantilever load with integrated glass clamping pad.

Item Code SPZ-VB-6063
Cantilever Rating 45 kg per pair
Price Basis Quoted per pair
Precision milled cantilever bracket for glass vitrine display

Load Dispersion & Glass Protection

Retail showcase brackets often concentrate bending force at a single contact point, risking glass fracture under thermal expansion. The SPZ-VB-6063 uses an elongated cantilever profile with an embedded dual-shore neoprene clamping pad. Clamping force is distributed evenly across 10 mm to 19 mm tempered glass shelves.

Wall mounting flange is pre-drilled for countersunk M8 mechanical anchors into concrete masonry or structural steel framing. Projection lengths range from 150 mm to 400 mm in 50 mm increments.

Available Projections 150 mm, 200 mm, 250 mm, 300 mm, 350 mm, 400 mm
Tested Safe Working Load 45 kg cantilever load per pair at 300 mm projection
Glass Thickness Acceptance 10 mm to 19 mm monolithic or laminated glass
Finish Options Clear anodised Class 1, Architectural Bronze, Matte Black
Quotation Foundation Quoted per pair, subject to projection length (150 mm to 400 mm) and anodised finish specification.

Concealed heavy-duty pivot hinge with needle bearings.

Dual needle-bearing core tested to 180 kg door weight with 3-axis independent micro-adjustment screws.

Item Code SPZ-PH-180
Door Load Rating 180 kg tested
Price Basis Quoted per complete set
Concealed heavy-duty pivot hinge with integrated bearing mechanism

Rotational Longevity & Margin Alignment

Heavy architectural vitrine doors place enormous shear and thrust forces on pivot points. Conventional brass bushings wear out rapidly, causing door sag and margin misalignment. The SPZ-PH-180 utilizes hardened stainless needle roller bearings that withstand continuous cycling without lubricant breakdown.

Independent 3-axis adjustment screws permit ±3 mm horizontal, ±4 mm vertical, and ±2 mm depth adjustment after door installation, allowing perfect perimeter reveals without removing the door leaf.

Maximum Leaf Capacity 180 kg total leaf weight at 1200 mm width
Rotation Range 360° free rotation with optional 90° hold-open stop
Floor Plate Anchors M10 stainless drop-in expansion anchors included
Bearing Construction Hardened 440C stainless steel needle rollers
Quotation Foundation Quoted per complete pivot set (top and bottom assemblies with floor plate and masonry anchors).

Modular standoff strut rail with vibration isolation.

Threaded locking collar assembly with vibration-damping EPDM isolation bushings for architectural glass and display panels.

Item Code SPZ-SR-EPDM
Barrel Diameters 19 mm, 25 mm, 32 mm
Price Basis Per meter + pack
Anodised architectural standoff strut with threaded locking collars

Acoustic & Vibration Decoupling

Vitrines and suspended glass walls in high-traffic shopping centers and transit hubs experience continuous low-frequency floor vibration. Without resilient bushings, metal-to-glass contact causes localized micro-fracturing and fastener loosening.

The SPZ-SR-EPDM system couples an internal M10 hardened stud with molded EPDM synthetic rubber isolation washers. The outer knurled collar threads smoothly to lock panels securely without marring the panel face.

Barrel Diameters 19 mm, 25 mm, 32 mm options
Wall Standoff Offsets 25 mm, 38 mm, 50 mm, 75 mm
Hole Drilling Requirement 14 mm diameter in glass or metal panel
Isolation Bushing Grade UV-resistant 65 Shore A EPDM elastomeric rings
Quotation Foundation Quoted per linear meter and fitting pack based on standoff diameter (19 mm, 25 mm, or 32 mm).

Submit hardware schedule for commercial quotation.

Our Simi Valley desk evaluates your quantities, substrate compatibility, finish preferences, and delivery timeline to provide a detailed estimate.

Warehouse Line 805-864-9013
Technical Email [email protected]
Check Fit Logic Fit Checker →

Commercial Estimate Request

Provide line item counts and substrate specifications. Quotations depend on volume tier, packaging grade, substrate anchors, and delivery urgency.